Repair of equipment

Application BDVP-4,2-01 set of equipment for application of liquid fertilizer makes it possible to combine manufacturing operations on the basic processing of soil and fertilizer, which significantly reduces costs ekspluatsiyni.

Factory adjustment mechanism is designed to work with tractors, which hook earring is at 45-47sm from the soil surface and the average depth of tillage 12-16sm. This regulation should ensure the horizontal position of the frame during operation of the unit that guarantees the same recess discs front and rear rows. When transferred into transport position harrows frame should maintain horizontal or inclined slightly forward to be 1-2 degrees, which ensures sufficient clearance between the vehicle wheels and ground.

Application BDVP-4,2-01 set of equipment for application of liquid fertilizer makes it possible to combine manufacturing operations on the basic processing of soil and fertilizer, which significantly reduces costs ekspluatsiyni.

Factory adjustment mechanism is designed to work with tractors, which hook earring is at 45-47sm from the soil surface and the average depth of tillage 12-16sm. This regulation should ensure the horizontal position of the frame during operation of the unit that guarantees the same recess discs front and

In the event of significant changes in the harrows and conditions of aggregation (eg, disking the soil to a greater depth and when, for example, a tractor another height of the trailing earrings) may need additional regulation of this mechanism to ensure horizontality frame harrow in working and transport position. This is done by adjusting clips 11 and adjustable finger 8. It should be borne in mind that the rearrangement finger holes 8 below, the frame in the transport position is to lean back and vice versa. And by increasing the number of clip 11 on the rod cylinder frame 5 can be tilted back in the position harrows, reducing the depth of drive progress forward. Reducing mounted on rod clip will lead to a leveling harrow frame in the position, or tilt it forward and increase the depth of tillage front wheels than to the rear.

If changes in the configuration harrows (eg when working without roller) need to increase efforts damper spring 2 by its compression nut 13. The lower damping spring 14 is not regulated.

WARNING! In preparing the harrows to long-distance journeys it should completely lift uphill hydraulic system and close the safety valves on all hydraulic cylinders including cylinder 5. When all the adjustment clip 11 should fix his rod.

Add a review
Get a call
To write a letter
Make an order